INTRODUCTION TO HOLLOW CONE SPRAY NOZZLE

Hollow ConeSiddharth Hollow cone spray nozzles give a uniform annular ring shaped spray pattern. These nozzles are made available in 2 fundamentally different swirling principles.

1. The Axial hollow cone
2. The Tangential hollow cone.

For better atomization, mists etc we have further developed low flow rate hollow cone spray tips used in conjunction with filters & retainer nuts. The spray angle of these tips vary from 60° to 80° and flow rate from 0.15 lpm to 2.0 lpm @ 3.0 bar differential pressure.

M.O.C. : Brass or S.S. 304 /316
Application: These nozzles find wide application in Air and gas washing‚ Powder coating‚ Gas cooling‚ Water aerating‚ Product degreasing‚ Metal treating‚ Brine spraying etc.

INTRODUCTION To AIR ATOMIZING NOZZLE

Air AtomizingSiddharth air atomizing nozzle is a unique two−substance nozzle used where very large and high viscous quantities of liquid and pastes have to be turned to mists or fine atomized. Highly atomized sprays can be obtained at comparatively low flow rates. Liquids can be fed under principles of gravity, suction or by pressure. These nozzles provide an independent passage for liquid and air whose flow can also be controlled allowing accurate metering.

The mixing in these nozzles takes place in 2 different ways...
1. Internal mixing
2. External mixing

Internal mixing is used where low viscous fluids absent from impurities need to be sprayed. External mixing is preferred for atomizing viscous fluids thereby avoiding clogging. All individual components are available as spare parts. i.e. : nozzle bodies‚ liquid inserts‚ Air caps‚ needle and needle related spares etc. The precise manufacturing of replacement parts ensures interchangeability and retains the desired performances.

End connections: End connections for Air‚ Liquid and Auto shut off can be provided at 180° apart from each other or all 3 ports in line whichever requested. Standard connections for Air and Liquid are 1/4”BSP (F) and 1/8”BSP (F).for Auto shut off

Material of construction is usually S.S.316 ‚ but can also be made available in S.S.304‚ Brass‚ P.V.C.‚ P.T.F.E. etc. And all wetted parts used are S.S.316‚ P.T.F.E‚ Viton or any food grade material

Application: These nozzles find wide application in Moistening‚ Humidifying‚ Product cooling‚ Film coating‚ Gas cooling etc.

Previous Next