HOLLOW CONE INTRODUCTION

Siddharth hollow cone spray nozzles give a uniform annular ring shaped spray pattern. These nozzles are made available in 2 fundamentally different swirling principles.

1. The Axial hollow cone & 2. The Tangential hollow cone.

For better atomization, mists etc we have further developed low flow rate hollow cone spray tips used in conjunction with filters & retainer nuts. The spray angle of these tips vary from 60° to 80° and flow rate from 0.15 lpm to 2.0 lpm @ 3.0 bar differential pressure.

M.O.C. : Brass or S.S. 304 /316.



TANGENTIAL ENTRY HOLLOW CONE
The tangential nozzles, at their inlet have been provided with an eccentric hole. Their design geometry provides a well balanced uniform atomization. Absence of any inserts and large free passage rotation prevents the nozzle from clogging.

Application: Humidifying of air, air washing, dust suppression, filter cleaning, Foam control etc.
End connection: 1/8” − 1” BSP /NPT male or female connection as requested.

 

 

INLINE ENTRY VANELESS HOLLOW CONE
The inline entry hollow cone is a two piece construction. The body inlet is provided with a single or two holes depending on the discharge capacity. The port at the outlet cap controls the spray angle and discharge. Absence of any inserts and large free passage prevents the nozzle from clogging. Application: Humidifying of air, Air washing, Dust suppression etc.
End connection: 1/8” − 2”BSP /NPT male or female connection as requested.

 

 

 

Next