FULL CONE FLANGED END
The Flanged end Full cone nozzles are used mainly where very high flow rates at very low pressures are desired and which cannot be accommodated in conventional thread sizes.

 

 

FULL CONE NARROW ANGLE
Narrow angle Full cone nozzles − produce a very high impact spray jet with deep penetration effect. They are available in 2 piece and 3 piece constructions.

 

 

TANGENTIAL ENTRY NON CLOGGING FULL CONE
The tangential full cone nozzles, have been provided with an eccentric hole at their inlet. Their design geometry provides a well balanced uniform atomization. Absence of any inserts and large free passage prevents the nozzle from clogging.

Application: Washing and cooling of gaseous and solid fluids, surface spraying and other washing and cleaning processes.

 

 

SPIRAL FULL CONE
Spiral nozzles are designed uniquely to deliver fine high velocity sprays at comparatively low pressures. The uniform distribution of spray droplets is mainly due to the precisely designed high impact blade angles. The special features of these nozzles are that they give high energy efficiency, very fine atomization. Absence of any inserts provides more space making it clog resistant thereby resulting in high discharge velocity even at a relatively smaller size.

For large flow capacity and maximum sized impurities to pass the Spiral Full Cone with large free passage has been developed. In this design the inlet bore is proportionately smaller than the helical free passage. This ensures large flow rates and maximum sized impurities could pass through the flow without clogging the nozzle.

Spiral nozzles are made available in Full cone and Hollow cone pattern too.

These nozzles find application in pollution control, cooling or aeration application, flue gas scrubbing, gas cooling, washing and rinsing, fire suppression and prevention etc.

 

 

FULL CONE NOZZLE RIGHT ANGLE ENTRY
An Axial Full Cone nozzle is mounted on a square body. This allows the nozzle to spray at an axis of 90° to the axis of the inlet end connection.

 

 

FULL CONE WITH SWIVEL BALL JOINT
The Swiveling ball joint assembly allows the nozzles to be clamped in any desired position for exact control of spray direction. Any nozzle i.e. FULL CONE, FLAT FAN, HOLLOW CONE can be fitted on the swivel ball. The Ball can be rotated in any position in a angle of 60°. The desired position is maintained by tightening the retainer nut.

The end connection is 1/8" 1/4" & 3/8" BSP / NPT, Male / Female. M.O.C.: BRASS & S. S.



 

Previous